Name: {{ product.title }}
Brand: Ottima
SKU: {{ product.sku }}
Price: {{product.price}} USD
Availability: InStock

Description

Dail+Push Dimmable LED Driver
2 in 1 IP20 dimming 0.1%-100%

Spec Sheet Download

DALI & Push Dimmable 2 in1 Led Driver

·Input Voltage: 100-277VAC & 180-240VAC

·Power Range:25-75W

·High Efficiency: up to 88% ; PF>0.95

·IP20 Design; Flicker-free

·Dimming range: 0-100%, LED Start at 0.1% possible

·Cooling by free air convection

·Dimming function: Built in DALI interface dimming function conform to

Dali Protocl IEC62386

·Push dimming function

·Protection:short circuit/over loading/over current/ Over temperature

·7 years warranty

Model No.	Power	Output Voltage	Output Current	Weight(kg)	Size(LWHmm)	Packing
OTM-TD25-DP-12 OTM-TD25-DP-24	25W	12v 24v	2.08A 1.04A	0.2	1555420	350240130mm,40PCS/CTN
OTM-TD50-DP-12 OTM-TD50-DP-24	50W	12v 24v	4.17A 2.08A	0.35	1786024	290215140mm,20PCS/CTN
OTM-TD75-DP-12 OTM-TD75-DP-24	75W	12v 24v	6.25A 3.13A	0.45	1806036	355215215mm 20PCS/CTN

Specifications

Protection	Short Circuit	shut down o/p voltage, re-power on to recover after fault condition is removed
	Over Current	≤1.2*Iou
	Over Loading	≦120% shut down o/p voltage, re-power on to recover
	Over temperature	100℃± 10℃ shut down o/p voltage ,re-power on to recover
Environment	Working TEMP.	-40～+70℃
	Working Humidity	20～90%RH, non-condensing
	Storage TEMP. Humidity	-40～+80℃，10～95%RH
	TEMP .coefficient	±0.03%/℃（0～50℃）
	Vibration	10～500Hz，2G 10min./1 cycle,period for 72min. each along X,Y,Z axes
Safety& EMC	Safety standards	UL8750+UL1310 Class 2 unit , EN61347-1 EN61347-2-13
	Withstand voltage	I/P-O/P:3.75KVAC
	Isolation resistance	I/P-O/P：100MΩ/500VDC/25℃/70%RH
	EMC EMISSION	EN55015,EN61000-3-2,3 (≧60%loading),FCC Part 15 B
Notes	All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature. Tolerance: includes set us tolerance, line regulation and load regulation . The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. Loading range from 10% to 100%.