led driver OTM-PD30W-12 OTM-PD30W-24|30W 12V 24V led light driver|justleddriver.com
gtag('config', 'AW-16974571023');
×
By using this website, you agree to our Privacy Policy Which provides more information about our privacy practices, and our Terms of use. For more information see our Cookie Policy
Input voltage: 90-130V/180-240V/100-240V Power Range:12-100w High Efficiency: up to 89% ; PF>0.95 IP20 Design Cooling by free air convection Suitable for dry or damp location use Multiple protections like short circuit & over-current &over-voltage protection Compatible with 0/1-10V Dimmers 5 years warranty
Specification:
Protection
Short Circuit
shut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading
≤120% shut down o/p voltage, re-power on to recover after fault condition is removed
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment
Working TEMP.
-40~+70℃
Working Humidity
20~90%RH, non-condensing
Storage TEMP. Humidity
-40~+80℃,10~95%RH
TEMP .coefficient
±0.03%/℃(0~50℃)
Vibration
10~500Hz, 2G 10min./1 cycle,period for 72min. each along X,Y,Z axes
Safety& EMC
Safety standards
EN60598
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSION
EN55022, EN55015, Class B
Noted
1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25Cof ambient temperature. 2. To extend the driver' s using life, please reduce the loading at lower input voltage.
Package
Connecting Diagram
Dimming Operation:
※Built-in 0/1-10V dimming function, IP20 rated .Output luminous can be adjusted through output cable by connecting a resistance or 0/1-10Vdc signal between DIM+ and DIM-
※Please DO NOT connect“DIM-”to“LED-”
User name Member Level QuantitySpecificationPurchase Date