})(window,document,'script','dataLayer','GTM-5JCZWWR4');
LED Driver OTM-VPA30-S12 OTM-VPA30-S24|led light driver|justleddriver.
gtag('config', 'AW-16974571023');
×
By using this website, you agree to our Privacy Policy Which provides more information about our privacy practices, and our Terms of use. For more information see our Cookie Policy
5 in 1 Dimmable LED Driver Triac dimmable/0-10v/1-10v/10v PWM/Potentiometer
Spec Sheet Download
·Output constant voltage
·Range: 110-277VAC
·Built-in active PFC function Power Factor: up to 0.95
·Efficiency up to 80%
·Dimming: 100-0.1% at PWM output,100%-0.01% dim at VR output,
·Load: 10-100% at PWM output, 0.01-100% at VR output
·Protection:short circuit/over loading/ Over temperature
·Full protection plastic housing, for dry, damp location
·Flicker-free
·Dimming function:
·Phase dimming: work with leading edge and trailing edge TRIAC dimmers
·1-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 5 in 1
·Cooling by free air convection
·Suitable for LED lighting and moving sign applications
Model
OTM-VPA30-S12
OTM-VPA30-S24
Output
DC Voltage
12V
24V
Voltage Tolerance
±0.5V
Voltage Regulation
±0.5%
Rated current
2.5A
1.25A
Rated power
30W
Load Regulation
±1 %
Input
Voltage Range
110-277VAC
Frequency Range
47 - 63Hz
Power Factor(Typ.)@ full load
0.99@120VAC 0.98@277VAC
THD(Typ. ) @ full load
<10%@120VAC <15%@277VAC
Efficiency(Typ.)@ full load
78%@120VAC 80% @277VAC.
78%@120VAC 80% @277VAC.
AC Current(Max.)
0.35A/110VAC
Inrush Current (Typ.)
13A
Leakage current
<0.5mA
Protection
Short Circuit
120VAC Hiccup mode,recovers automatically after fault condition is removed 277AVC shut down o/p voltage, re-power on to recover after fault condition removed
Over Load
≤120% Hiccup mode,recovers automatically after fault condition is removed
Over temperature
100℃±10℃ shut down o/p voltage, automatically recover after cooling.
Environment
Working TEMP.
-40~+60℃ (see below derating curve)
Working Humidity
20 - 95%RH,non-condensing
Storage TEM.,Humidity
-40 - +80℃,10 - 95%RH
TEMP.coefficient
±0.03%/℃(0 - 50℃)
Vibration
10～500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety & EMC
Safety standards
UL8750+UL1310
Withstand voltage
I/P-O/P:3.75KVAC
Isolation resistance
I/P-O/P: 100MΩ/500VDC/25℃/70%RH
EMC Emission
FCC Part 15 B
Others
Net Weight
0.35Kg
Dimension
260*30*18.5mm(L*W*H)
packing
330*270*130mm 50pcs /CTN
Notes
1. All parameters NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.
Mechanical Specification
※Input terminals "Black" and "White" to connect to AC L and N.
※Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.
※Output terminals DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) white connect to 0/1-10V dimmer signal (-)
※Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection
※Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
※Note: Any other requests we can customized.
UsingTriac MLV wiring diagram
UsingTriac ELV wiring diagram
※Using 0-10/1-10V dimming （1）
※Using 0-10/1-10V dimming （2）
※Using 0-10/1-10V dimming （3）
■ Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage;
User name Member Level QuantitySpecificationPurchase Date
