OTM-BD96-24-CCT / OTM-BD-9648-CCT
Como una solución de alimentación LED de alto rendimiento, la unidad driver-atenuador proporciona 96W de potencia de salida estable, asegurando que sus lámparas LED (como tiras de LED, paneles de luz, etc.) reciban un suministro de energía suficiente y continuo. Su característica principal es la capacidad de atenuación CCT (Temperatura de Color Correlacionada), lo que significa que no solo puede ajustar el brillo de la luz (atenuación), sino también cambiar con precisión la temperatura de color de la luz, desde una luz amarilla cálida (como 2700K) hasta una luz blanca fría refrescante (como 6500K), creando fácilmente una variedad de ambientes para satisfacer las necesidades de diferentes escenas.
Este driver LED sigue estrictamente los más altos estándares de seguridad de la industria y ha sido listado por UL para garantizar la seguridad y fiabilidad del producto. Sus características de salida de bajo voltaje Clase 2 hacen que la instalación y el uso sean más seguros, especialmente adecuado para varios proyectos de iluminación LED de bajo voltaje en entornos residenciales y comerciales. Ya sea una sala de estar, dormitorio, cocina, o un escaparate de tienda u oficina, esta unidad dos en uno puede proporcionar una solución de iluminación estable, segura y altamente personalizable.
Model | OTM-BD96-24-CCT | OTM-BD96-48-CCT |
Certificate | UL / cUL / FCC / Class P / SELV / RoHS / Reach |
Output | DC Rate Voltage | 24V (24V-26V adjust by knob) | 48V (48V-50V adjust by knob) |
Voltage Tolerance | ±0.5V |
Load Regulation | ≤1% | ≤1% |
Line Regulation | ≤0.5% |
Rated current | 4A | 2A |
Rated power | 96W | 96W |
Input | Voltage Range | 120VAC |
Frequency Range | 60Hz |
Power Factor @ full load | ≥0.99 |
THD(Typ.) @ full load | ≤10% |
Efficiency @ full load | 91.0% | 92.0% |
AC Current (Max.) | 0.9A | 0.9A |
Inrush Current (Typ.) | 50A, 150us@50% Ipeak |
Leakage current | <0.5mA |
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed |
Over Load | ≥110% Constant current mode, recovers automatically after fault condition is removed |
Over temperature | Shell surface temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling |
Environment | Working TEMP. | -40~+60℃ (see below derating curve) |
Working Humidity | 20 - 95%RH non-condensing |
Storage TEM.,Humidity | -40 - +80℃,10 - 95% RH non-condensing |
TEMP.coefficient | ±0.03%/℃(0 - 50℃) |
Vibration | 10~500Hz, 2G 12min./1 cycle, period for 72 min. each along X,Y,Z axes |
Safety & EMC | Safety standards | UL8750 CAN/CSA-C22.2 No.250.13 (US) |
Withstand voltage | I/P-O/P:1.8KVAC I/P-F/G:1.8KVAC O/P-F/G:0.5KVAC (US) |
Isolation resistance | I/P-O/P:100MΩ / 500VDC / 25℃ / 70% RH |
EMC Immunity | FCC/ICES do not request this test (US) |
EMC Emission | FCC Part15 Subpart B ANSI C63.4:2014 (US) |
Others | Net Weight | 0.25KG |
Dimension | 105*54*51mm / 4.134"x2.126"x1.996" (Inch) |
Packing |
|
Notes | 1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance and load regulation . |
Derating Curve (Output power VS Ambient TEMP)
Derating Curve (Output power VS Ambient TEMP)
1. To extend their life, please refer to the Derating Curve and derate according to the temperature.
2. The output current of the LED driver should be selected according to the rated current of the lamp and the ambient temperature.
Normally, we recommend the power supply to reserve a certain amount of load to extend LED driver's life.
Mechanical Specification
American Wire Gauge |
Input wires | Black cable (L), Red black cable (L1) , White cable (N) and Green cable (FG) (4*18AWG) |
Output wires | Red cable (V+) ,White gray cable(CW-),Yellow cable( WW-) (12V:3*16AWG, 24V/48V:3*18AWG) |
Warm tips:
1.Any other requests for, we can customize.
2.Please ensure that the connection is correct.
Connecting Diagram
① For standard dimming system
② For 3-way dimming system
Note: Dimmer's panel is not replaceable.
Knob to adjust the voltage
MANUAL VOLTAGE TUNING
(+/-2V) FOR OUTPUT OPTIMIZATION
12V output volt.: 12-13.5V
24V output volt.: 24-26V
48V output volt.: 48-50V
Instructions
1. This driver+dimmer 2 in 1 should be installed by qualified and professional person.
2. Please make sure the driver+dimmer 2 in 1 is installed with adequate ventilation around it to allow for heat dissipation.
3. Ensure that connection is correct to avoid LED light or driver+dimmer 2 in 1 be damaged.
4. If the driver+dimmer 2 in 1 cannot work normally, don’t maintain privately.
Have any questions, please contact us
