Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China
277 Volt LED Driver

277 Volt LED Driver

30W 24V constant voltage led driver
Triac dimmable LED Driver
IP66

LED has proved to be the trend of next generation lighting for it's environment-friendly, energy-saving, light efficiency, reliablity. Pccooler's innovative LED heatsinks with the powerful head dissipation capability and reliablity greatly extend the LED lighting's lifespan, thus remarkable reduce the expense of lighting remarkable reduce the expense of lighting operation and maintenance.


Model

OTM-TD30-PH12

OTM-TD30-PH24

Output

DC Voltage

12V

24V

Voltage Tolerance

±0.5V

Rated current

2.5A

1.25A

Rated power

30W

Input

Voltage Range

200-240VAC

Frequency Range

47~63HZ

Power Factor

PF≧0.97/200VAC  PF≧0.97/230VAC PF≧0.97/240VAC(Full loading)

Full Load Efficiency(Typ.)

79%

79%

AC Current (Max.)

0.22A

0.22A

Leakage current

<0.50mA

Protection

Short Circuit

shut down o/p voltage, re-power on to recover after fault condition is removed

Over Loading

≦120% shut down o/p voltage, re-power on to recover

Over Current

≦ 1.2 *Iout

Over Temperature

100℃± 10℃ shut down o/p voltage ,re-power on to recover

Environment

Working TEMP.

-40-+70℃

Working Humidity

20-90%RH, non-condensing

Storage TEM.,Humidity

-40~+80℃,10-95%RH

TEMP.coefficient

±0.03%/℃(0-50℃)

Vibration

10-500Hz,2G 10min./1 cycle,period for 72min,each along X,Y,Z axes.

Safety&EMC

Safety standards

EN61347-1 EN61347-2-13

Withstand voltage

I/P-O/P:3.75KVAC

Isolation resistance

I/P-O/P:100MΩ/500VDC/25℃/70%RH

EMC EMISSION

EN55015,EN61000-3-2,3 (≧60%loading)

Others

Net.Weight

0.21KG

Size

155*54*20mm (L*W*H)

packing

160*60*23mm for inner box ; 350*240*130mm for carton 40PCS/CTN

Notes

1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃ of ambient temperature.

2. Tolerance: includes set us tolerance, line regulation and load regulation.

3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final  equipment manufactures must be-qualify EMC Directive on the complete installation again

4. Loading range from 10%  to 100%


Product Features

1. By using the most power and  efficient flood light heat sink. the completed LED light can work up to 50000 hours, save up to 80% energy, have better lighting characteristics than that of traditional halide lamp of 200W;

2. Massive fins for efficient cooling technology, rapidly trasfer the heat of the LED chips to the massive fins;

3. The entire housing coated by electrophoretic pait, excellent corrosion resistance; 

4. Stainless steel screws and parts;

5. High voltage, low current, energy-saving, environment friendly;

6. Performance stability, high IP rating of water-proof and dust-proof;

7. Good apperance, small size and weight, flexible to install;

8. Columnar-structured heat radiator to dissipate heat from all directions.


Materials and process

1.Tempered glass panel to protect the lighting source, the transparent rate up to 93%; 

2.1060 aluminum heat sink with "zipped-fins"technology, optimized airflow ductinside the housing;

3.The entire housing coated by electrophoretic pait, excellent corrosion resistance;

4.Stainless steel screws and parts. 



Our customers



Hot Tags: 277 volt LED driver, China, mAnufacturers, factory, in stock
Inquiry