Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

24V 50W LED Driver

60W 24V constant voltage led driver
Triac dimmable LED Driver
IP20

model

OTM-TD60W-36V

Output

DC Voltage

36V

Voltage Accuracy

±0.5V

Rated current

1.67A

Rated power

60W

Input

Voltage Range

100-130V/ 170-265Vac

Frequency Range

47~63HZ

Power Factor ( Typ.)

PF>0.95/110V,PF>0.96/170V,PF>0.95/220V,PF>0.93/265V

Full Load Efficiency(Typ.)

>85%

AC Current(Typ.)

0.61A/110VAC, 0.58A/170VAC, 0.46A/220VAC, 0.41A/265VAC

Leakage current

<0.25mA/110V/220VAC

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition

is removed.

Over voltage

<140VAC(90~135V) , <270VAC(170~265V)

Environment

Working TEMP.

-40~+60℃

Working Humidity

20~90%RH,non-condensing

Storage TEM.,Humidity

-40~+80℃,10~95%RH

TEMP.coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz,2G 10min./1 cycle,period for 60min.

each along X,Y,Z  axes

Safety&EMC

Safety standards

EN-60950-1, EN61347-1/-2/-13

Withstand voltage

I/P-O/P:3.75KVAC

Isolation resistance

I/P-O/P:100MΩ/500VDC/25℃/70%RH

EMC EMISSION

Compliance toEN55015,EN61000-3-2 (>50%load)

EMC IMMUNITY

Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11, EN61547

Alight industry level (surge4KV)

Others

Weight

About 1.0Kg

Size

210*68.5*43mm(L*W*H)

packing

324*298*176mm (L*W*H)

Notes

1. All parameters NOT specially mentioned are measured at 110V/230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted  pair-wire terminated with a 0.1uf &47uf parallel capacitor.

3.  Tolerance:includes set us tolerance,line regulation and load regulation.


Feature

Compliance to worldwide safety regulations for lighting   

Strong compatibility, flicker-free dimming

Work with leading edge and trailing edge


60W triac dimmable driver Mechanical Specification

※Input Brown with AC (L),Blue with AC(N)

※Output Red is(DIM+),Black is(DIM-)

※Note: Any other requests we can customized.



Shipping and packing


FAQ

What is the ways of triac dimmable led driver

1. Convenient wiring ‘Dimming function can be realized only by cutting the triac dimming device on the AC terminal L line or one of the N lines, but the driver power supply must support the triac dimming function!

2, triac dimming domestic and international applications are still relatively extensive, mainly in the installation process, the use of wiring is simple, saves labor costs for the project; especially in foreign countries, labor costs are very high, the use of triac dimming more .

Disadvantages of triac dimming: 1. There is interference to the power grid; 2. The controller is not standardized and there is no standard)

2.What is a leading edge dimmer? What is a trailing edge dimmer?

The operating mode of the leading edge dimmer is to achieve the effect of dimming by changing the

voltage waveform through the thyristor device. The leading edge dimmer will have a little noise when 

dimming! Unstable input voltage will affect the dimming effect! This is a matter of concern. (At home and abroad are basically the same, leading-edge dimming is a bit loud noise); trailing edge dimmer works by changing the voltage waveform through the MS tube to achieve dimming, the circuit layout is relatively complex and relatively high cost, the advantage is the input voltage Unstable, will not affect the dimming effect; no sound when dimming


Hot Tags: 24V 50W LED driver, China, mAnufacturers, factory, in stock
Inquiry