Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

Tube Light Power Supply 0-10V

42W 350mA constant current led driver
0-1/10V PWM LED Driver
IP66


Model

OTM-PD120350

Output

DC Current

350mA

Current Tolerance

±3%

Output voltage range

72-120V

Rated power

42W

Input

Voltage Range

100~265VAC

Frequency Range

47~63HZ

Power Factor ( Typ.)

PF≥0.92

Efficiency(Typ.)

>87%

AC Current(Typ.)

0.24A

Leakage current

<0.7mA

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Loading

≤120%

Over Current

≤1.4*Iout

Environment

Working TEMP.

-40~+60℃

Working Humidity

20~95%RH non-condensing

Storage TEMP.,Humidity

-40~+80℃,10~95%RH

TEMP.coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes

Safety&EMC

Safety standards

EN61347-1 EN61347-2-13

Withstand voltage

I/P-O/P:3.75KVAC

Isolation resistance

I/P-O/P:100M Ohms/500VDC/25℃/70%RH

EMC EMISSION

Compliance to EN55015,EN61000-3-2 (≧60%load)

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry

Level(surge 4KV) Criteria A

Others

Net.Weight

0.55Kg

Size

180*60*35mm(L*W*H)

packing

355*215*215mm/20pcs /CTN

Notes

1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.

2. Tolerance:includes set up tolerance,line regulation and load regulation.

3. The power supply is considered as a component that will be operated in combination with final Equipment.

Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.



•Supply Voltage: 100-265Vac or 71-120Vdc

•100,000Hour Life @ Tc=75℃

•3 Year Warranty @ Tc<=75℃

•AirsetTM NFC Programmability

•+/-2% Output Current Accuracy

•0-10V/PWM/Time Dimmable

•Dim Off with 0.5W Standby Power

•350mA Auxiliary Power to Power Controllers and Fans


2(001).jpg


FAQ

Helpful Tips for a Better LED Driver Solution

Q1: How to select a suitable driver from the first point?

Firstly, forward current and power of a LED module is necessary. These could give an initial judge on the driver selection. The next step would be other required features depending on the application, like surge protection level, waterproof level etc.

Q2: What is dimming via 0-10V/PWM/Timer?

0-10V function can be controlled by active dimmer or passive resistor;

PWM function can be controlled by PWM generator;

Timer control can intelligently and autonomously manage light of LED source, using the multistep pre-programming scheme which is more convenient for filed application and energy-saving.

Q3: What is SELV?

SELV stands for safety extra-low voltage.

Following is the definition from IEC60598-1:

A voltage which does not exceed 50 V a.c. r.m.s. between conductors, or between any conductor and earth, in a circuit which is isolated from the supply mains by means such as a safety isolating transformer or converter with separate windings.


Hot Tags: tube light power supply 0-10V, China, mAnufacturers, factory, in stock
Inquiry