Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

LED Driver 50W 0-10V

60W 500mA constant current led driver
0-1/10V PWM LED Driver
IP66

Model

OTM-PDW120500

OTM-PDW85700

OTM-PDW-601050

Output

DC Current

500mA

700mA

900mA

Current Tolerance

±3%

Output voltage range

72-120V

51-85V

42-70V

Rated power

60W

58.5W

63W

Input

Voltage Range

100~265VAC

Frequency Range

47~63HZ

Power Factor ( Typ.)

PF≥0.92

Efficiency(Typ.)

>86%

>86%

>86%

AC Current(Typ.)

0.34A

0.34A

0.36A

Leakage current

<0.7mA

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Loading

≤120%

Over Current

≤1.4*Iout

Environment

Working TEMP.

-40~+60℃

Working Humidity

20~95%RH non-condensing

Storage TEMP.,Humidity

-40~+80℃,10~95%RH

TEMP.coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes

Safety&EMC

Safety standards

EN61347-1 EN61347-2-13

Withstand voltage

I/P-O/P:3.75KVAC  I/P-FG:1.88KVAC  O/P-FG:0.5KVAC

Isolation resistance

I/P-O/P I/P-FG O/P-FG:100M Ohms/500VDC/25℃/70%RH

EMC EMISSION

Compliance to EN55015,EN61000-3-2 (≧60%load)

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry

Level(surge 4KV) Criteria A

Others

Net.Weight

1.1Kg

Size

200*70*46mm(L*W*H)

packing

329*279*176mm/10pcs /CTN

Notes

1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.

2. Tolerance:includes set up tolerance,line regulation and load regulation.

3. The power supply is considered as a component that will be operated in combination with final Equipment.

Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


Tips:

1. The product must be connected the LED lamps, and, can't no-load power for a long time then turning on the product.

2. Do not short circuit.

3.Please refer to the instruction manual before use.

4. If not sure how to use the product,please contact us before use.


Application:

Suitable for LED electronic display screen, LED street lights, LED tunnel lights, LED bridge lights, LED panel lights, LED ceiling lights, moving sign application, etc.



Storage:

1.Keep Dry, don’t shock

2.Storage in below 35°C,humidity less than 75% environment


Packing for:Bubble bag ,inner box,and carton etc


Quality control

 


Hot Tags: LED driver 50W 0-10V, China, mAnufacturers, factory, in stock
Inquiry