Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

AC to DC Dimmable LED Driver 0-10V

100W 2500mA constant current led driver
0-1/10V PWM LED Driver
IP66

Model

OTM-PD402500

Input voltage range

100-265Vac

Input frequency

47-63Hz

Power factor

0.99(Max),>0.90 100-277Vac input,70%~100% load

Input current

0.811A at 100Vac

Inrush current

90A at 220VAC, 25℃ cold start

Leakage current

0.5mA Max at 220Vac / 50Hz input

Maximum output power

100W

Line regulation

±5%

Rode regulation

±5%

Start up time

<0.5 S at 220Vac

Protections

Over voltage protection,Short circuit protection,auto recovery

THD

<20%,265Vac,50Hz inout,70%~100% load

<15%,110Vac,60Hz inout,60%~100% load


Features:

Rated Input Voltage range 100-256Vac

High efficiency :88%

Active PFC: 0.98 Max

Low THD. Constant current

3 in1 dimming function :0-10V/PWM dimming,Rx function

Low Ripple and Noisy.No stroboscopic

Protections: Over Voltage protection;Short Circuit protection

Output current can be regulated by adjustable trim port

Input terminals suitable for 12-22AWG wire


FAQ

Helpful Tips for a Better LED Driver Solution

Q1: How to select a suitable driver from the first point?

Firstly, forward current and power of a LED module is necessary. These could give an initial judge on the driver selection. The next step would be other required features depending on the application, like surge protection level, waterproof level etc.

Q2: What is dimming via 0-10V/PWM/Timer?

0-10V function can be controlled by active dimmer or passive resistor;

PWM function can be controlled by PWM generator;

Timer control can intelligently and autonomously manage light of LED source, using the multistep pre-programming scheme which is more convenient for filed application and energy-saving.


Hot Tags: AC to DC dimmable LED driver 0-10V, China, mAnufacturers, factory, in stock
Inquiry