Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

110V LED Driver 0-10V

280W 24V constant voltage led driver
0-1/10V PWM LED Driver
IP66

MODEL

OTM-PDW280-24

OUTPUT

DC VOLTAGE

24V

CONSTANT CURRENT REGION

12 ~ 24V

RATED CURRENT

11.7A

RATED POWER

280W

RIPPLE & NOISE

150mVp-p

VOLTAGE ADJ. RANGE

Adjustable for A-Type only (via built-in potentionmeter)

20.4 ~ 25.2V

CURRENT ADJ. RANGE

Adjustable for A-Type only (via built-in potentionmeter)

7.78A

VOLTAGE TOLERANCE

±1.0%

LINE REGULATION

±0.5%

LOAD REGULATION

±0.5%

SETUP, RISE TIME

500ms,80ms/115VAC, 230VAC

HOLD UP TIME

15ms/115VAC, 230VAC

INPUT

VOLTAGE RANGE

90 ~ 305VAC   127 ~ 431VDC

FREQUENCY RANGE

47~63Hz

POWER FACTOR

PF≥0.98/115VAC, PF≥0.95/230VAC, PF≥0.93/277VAC @ full load

TOTAL HARMONIC DISTORTION

THD< 20% (@ load≥50% /115VAC, 230VAC; @ load≥75%/277VAC)

EFFICIENCY (230Vac)

87%

EFFICIENCY (277Vac)

87%

AC CURRENT

7A / 115VAC3.3A / 230VAC 2.9A / 277VAC

INRUSH CURRENT

COLD START 70A(twidth=1000μs measured at 50% Ipeak) at 230VAC

MAX. No. of PSUs on 16A CIRCUIT BREAKER

1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

STANDBY POWER CONSUMPTION

<0.5W at remote off

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

13 ~ 16V

Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, re-power on to recover

FUNCTION

REMOTE ON/OFF CONTROL

Power on: "High">2~5V or Open circuit Power off : "Low"<0~0.5V or Short circuit

5V STANDBY

5VSB : 5V @5A ; tolerance±5%, ripple : 100mVp-p(max.)

ENVIRONMENT

WORKING TEMP.

Tcase= -40 ~ +90°C

MAX. CASE TEMP.

Tcase=+90°C

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40~+80°C,10~95% RH

TEMP. COEFFICIENT

±0.03%/°C (0 ~ 55°C )

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min.each along X, Y,Z axes

SAFETY &EMC

SAFETY STANDARDS

U60950-1, U8750(type&rdquo;HL&rdquo;), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP65 or IP67, J61347-1, J61347-2-13 approved

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH

EMC EMISSION

Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C(≥50% load) ; EN61000-3-3

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV)

OTHERS

MTBF

76.9K hrs min. MIL-HDBK-217F (25°C)

DIMENSION

250*79*52mm (L*W*H)

PACKING

3.9Kg; 4pcs/16.6Kg/0.9CUFT


Feature

Ultra-deep dimming down to 0.5%, compatible with DMX

>70,000 hours lifetime at 75ºC Tcase 

>7 years warranty at 75ºC Tcase

Min. operating temperature @-40ºC

12V/100mA auxiliary output (optional)

Constant current & constant voltage output

Output current & Output voltage programmable

Compatible with 0(0.05)-10V, PWM, external resistor, Clock, DMX dimming

Universal input voltage:108-305Vac

Safety according to UL8750 & EN61347-2-13

Surge voltage rating: L-N 5.5kV,L/N-Earth 11kV

EMC according to FCC part 15 Class B

Lightning, OVP, SCP, OTP & Open Circuit Protection Electrical Specification



Hot Tags: 110V LED driver 0-10V, China, mAnufacturers, factory, in stock
Inquiry