Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

0-10V DC Power Supply 50W

60W 24V constant voltage led driver
0-1/10V PWM LED Driver
IP66

Model

OTM-PDW6012

OTM-PDW6024

OTM-PDW6036

OTM-PDW6048

Output

DC Voltage

12V

24V

36V

48V

Voltage Tolerance

±0.5V

Rated current

0~5A

0~2.5A

0~1.66A

0~0.1.25A

Rated power

60W

Input

Voltage Range

100~265VAC

Frequency Range

47~63HZ

Power Factor ( Typ.)

PF≥0.92

Efficiency(Typ.)

>83%

>85%

>86%

>85%

AC Current(Typ.)

0.36A

0.35A

0.34A

0.35A

Leakage current

<0.7mA

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Loading

≤120%

Over Current

≤1.4*Iout

Environment

Working TEMP.

-40~+60℃

Working Humidity

20~95%RH non-condensing

Storage TEMP., Humidity

-40~+80℃,10~95%RH

TEMP. coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes

Safety & EMC

Safety standards

EN61347-1 EN61347-2-13

Withstand voltage

I/P-O/P:3.75KVAC  I/P-FG:1.88KVAC  O/P-FG:0.5KVAC

Isolation resistance

I/P-O/P I/P-FG O/P-FG:100M Ohms/500VDC/25℃/70%RH

EMC EMISSION

Compliance to EN55015,EN61000-3-2 (≥60%load)

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry

Level(surge 4KV) Criteria A

Others

Net. Weight

1.1Kg

Size

200*70*46mm(L*W*H)

packing

329*279*176mm/10pcs /CTN

Notes

1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature.

2. Tolerance: includes set up tolerance, line regulation and load regulation .

3. The power supply is considered as a component that will be operated in combination with final Equipment.

Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


Product Details

Note: 1. The above technical parameters are measured at 25 ℃. 

2. Output voltage ripple and noise are under the condition of rated voltage and rated current, to use an oscilloscope of 20MHz bandwidth which connects to the output of the switching power supply, at the same time the output of the power supply parallels a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor. 

3. Measured power conversion efficiency is under the condition of the input AC220V, Output the maximum voltage and full load. If under the condition of the input AC110V, its efficiency will be lower 1-2%. the power supply worked 1-2 hours later ,its measured efficiency higher 1-2% than it just started working.

Between DIM + and DIM- ,to connect a 100K adjustable resistor or a 0-10V DC variable voltage or a 10V PWM duty cycle adjustable square wave adjusts the power supply so that the output current of the power supply is changed in the 0-100% (rated) range to achieve 0-100% dimming effect.



Shipping and packing

Packing in small box, 15pcs/carton. 

1.Payment term: T/T 100% payment in advance. Or TT 30% deposit after order confirmed, the 70% final payment before delivery. Or Pay pal Money Gram Western Union for small amount . 

2. Sample policy: Samples are always available for each mode. Sample of product can be ready in 3~7 days once payment received. 

3. Shipping port: FOB Shenzhen, GD, China.


Hot Tags: 0-10V DC power supply 50W, China, mAnufacturers, factory, in stock
Inquiry