Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

0-10V 50W Dimming LED Driver

60W 500mA constant current led driver
0-1/10V PWM LED Driver
IP66

Model

OTM-PDW601050

OTM-PDW1421400

OTM-PDW1261750

OTM-PDW1302100

Output

DC Current

1050mA

1400mA

1750mA

2100mA

Current Tolerance

±3%

Output voltage range

36-60V

25-42V

22-26V

18-30V

Rated power

63W

58.8W

63W

63W

Input

Voltage Range

100~265VAC

Frequency Range

47~63HZ

Power Factor ( Typ.)

PF≥0.92

Efficiency(Typ.)

>87%

>85%

>85%

>85%

AC Current(Typ.)

0.36A

0.34A

0.37A

0.37A

Leakage current

<0.7mA

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Loading

≤120%

Over Current

≤1.4*Iout

Environment

Working TEMP.

-40~+60℃

Working Humidity

20~95%RH non-condensing

Storage TEMP.,Humidity

-40~+80℃,10~95%RH

TEMP.coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes

Safety&EMC

Safety standards

EN61347-1 EN61347-2-13

Withstand voltage

I/P-O/P:3.75KVAC  I/P-FG:1.88KVAC  O/P-FG:0.5KVAC

Isolation resistance

I/P-O/P I/P-FG O/P-FG:100M Ohms/500VDC/25℃/70%RH

EMC EMISSION

Compliance to EN55015,EN61000-3-2 (≧60%load)

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry

Level(surge 4KV) Criteria A

Others

Net.Weight

1.1Kg

Size

200*70*46mm(L*W*H)

packing

329*279*176mm/10pcs /CTN

Notes

1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃ of ambient temperature.

2. Tolerance:includes set up tolerance,line regulation and load regulation .

3. The power supply is considered as a component that will be operated in combination with final Equipment.

Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


1.No flicking,analog voltage DC 0/1-10V dimmer, active&passive 0/1-10v dimming general to use,can be compatible with the large control system structure to dim.

2.With short circuit protection,power protection,overheating protection function.

3.With the self-testing function.


1(001).jpg


Note:

1.Use of switching power supply power on before, please check whether the input and output lines connect to (alternating current (ac) line of fire, zero line, the grounding wire, dc voltage positive and negative), suggest using wire sectional area more than 0.75 mm copper wire; In order to ensure the safety of using and reduce interference, please ensure that grounding end is good reliable grounding.

2.When dimming,the output has the LED dimming instructions.

3.The 0-10V dimmer can cooperate with LUTRON and DYNALITE system.


Shipping and packing

4(001).jpg


Hot Tags: 0-10V 50W dimming LED driver, China, mAnufacturers, factory, in stock
Inquiry