Contact Us
TEL: +86-755-21006895
Mob: +8618923838718
E-mail: sales01@ottima-tech.com
Address: 4th Floor, Building 1, Puhua Technology Park, Gongyeyuan Road, Da Lang, LongHua New District, Shenzhen, China

0-10V 36 Watt DC Power Supply

45W 24V constant voltage led driver
0-1/10V PWM LED Driver
IP20

Model

OTMPD45-12V

OTMPD45-24V

OTMPD45-36V

OTMPD45-48V

Output

DC Voltage

12V

24V

36V

48V

Voltage Tolerance

±0.5V

Rated current

0~3.75A

0~1.87A

0~1.25A

0~0.93A

Rated power

45W

Input

Voltage Range

100~265VAC

Frequency Range

47~63HZ

Power Factor ( Typ.)

PF≥0.92

Efficiency(Typ.)

>83%

>85%

>86%

>85%

AC Current(Typ.)

0.27A

0.26A

0.26A

0.26A

Leakage current

<0.7mA

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Loading

≤120%

Over Current

≤1.4*Iout

Environment

Working TEMP.

-40~+50℃

Working Humidity

20~95%RH non-condensing

Storage TEMP.,Humidity

-40~+80℃,10~95%RH

TEMP.coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes

Safety&EMC

Safety standards

EN61347-1 EN61347-2-13

Withstand voltage

I/P-O/P:3.75KVAC

Isolation resistance

I/P-O/P:100M Ohms/500VDC/25℃/70%RH

EMC EMISSION

Compliance to EN55015,EN61000-3-2 (≧60%load)

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6, 11, EN61547, light industry

Level(surge 4KV) Criteria A

Others

Net.Weight

0.4Kg

Size

180*60*35mm(L*W*H)

Packing

355*215*215mm  20PCS

Notes

1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature

2. Tolerance:includes set up tolerance,line regulation and load regulation.

3. The power supply is considered as a component that will be operated in combination with final Equipment

Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


Advantages of dimmable 45w led driver 0-10v

•1.The constant dc current output provides the long lifetime and optimum operation of high power led.

•2.Output voltage according to the load change.

•3.With different low current output, driver the led chip directly.

•4.High efficacy,multiple leds series, in parallel connection, or combination.

•5.Timing dimming,timing to turn off the lights function

•6.Have DAC(0-10v) interface, remote control system compatible


Push and hold to dim

• On/off control: short push (<1s) on the switch.

• Stepless dimming: long push (>1s) on the switch.

• For fine tuning of light level: with every other long push, the light level goes to the opposite direction.

• Built--in with permanent memory: light returns to the previous dimming level when switched off and on again, even at power failure.


Note:1. This “1-10V” output is isolated, SELV output.

2. “Switch-Dim” is prior to “1-10V”. To shift dimming from “Switch-Dim” to “1-10V”, the end-user should short-circuit“1-10V” first for at least 3s.



Hot Tags: 0-10V 36 watt DC power supply, China, mAnufacturers, factory, in stock
Inquiry